MAIN WATER VALVE SHUTDOWN: HOW YOU CAN KNOW

Main Water Valve Shutdown: How You Can Know

Main Water Valve Shutdown: How You Can Know

Blog Article

Call Today

Each person maintains his or her own opinion involving How to Turn off the Water for Plumbing Repairs.


How to Turn off the Water for Plumbing Repairs
If you try to shut the water off to your fixtures by using an angle quit which doesn't work you will certainly need to shut of the water main to make your repair service. There are likewise lots of other factors you may need to close the water pipe like repairing frozen pipes, repairing leakages, replacing components or faucets.
Many people are not aware that they also have a water main valve right in their very own home as well as simply call a plumber of never ever wind up doing the repair until points obtain actually bad due to the fact that they just do not know that closing the water main is truly very easy.
One of the most usual areas a water main will be found in residence remains in your boiler room, basement, or an eliminated panel in a section for your house.
Once you locate the water pipe you will just turn the valve clockwise to shut all the water off in your house up until you have ended up the repair service. Some residences will have a ball valve with a bar that you can pull rather than count on shut the water off.

How to Find and Shut Off Main Water Shutoff Valve


Where is the main water shutoff valve located?


This is the million-dollar question. Your main water shutoff valve could be located in several different areas. If you have a home with a basement and crawlspace, it is probably located on an interior wall near the front of the house, where the water comes in from the water meter. In this case, it is most likely hiding in plain sight. If your home was built on a slab, the valve might be located near the hot water heater or inside your garage.


How to Turn Off Main Water Valve


Once you find the shutoff valve you will either hand turn it (clockwise for gate valves and perpendicular to the pipe for ball valves) or use the appropriate tool depending on the design.


If it is located inside your house, it will most likely be a gate or “wheel” valve that you’ll simply turn clockwise to stop the flow of water. Another way to shut off the water is to go to the water meter box. Just be careful not to mess with the city shutoff side of the meter.


Where are the isolation valves?


Isolation shutoff valves are much easier to locate. Most essential home plumbing fixtures have separate valves that control the water flow. Sinks, toilets, water heaters, and washing machines should have a small valve located near the plumbing that can easily shut off the individual water supply.


Simply turning the valve clockwise will turn off the water flow. Sink and toilet problems can be dealt with quickly by simply shutting off the supply this way. It’s always good to test the isolation valves periodically to make sure they are working properly.



Again, once your tighten the water shutoff valves and turn off the water, open up your hot and cold lines to release pressure and test if the water is indeed off.



Make it a priority to locate the water valves in your home – and keep plumbing problems from turning into costly repair situations.

https://happyhiller.com/blog/how-to-find-shut-off-main-water-shutoff-valve/


How to Find and Shut Off Main Water Shutoff Valve

Do you appreciate reading about How to Turn Off Water To House and Prevent Damage? Create feedback further down. We'd be pleased to hear your suggestions about this blog entry. We are looking forward that you come back again in the near future. Sharing is nice. Helping others is fun. We truly appreciate reading our article about How to Turn off the Water for Plumbing Repairs.


Check This Out

Report this page